Volvo Throttle Body Sensor Rebuild Kit


Due to issues with the current stock of sensors we have pulled them until we can get replacements. If you have purchased a sensor recently and you’re having issues; please contact us and remember to have a description of the issues or codes. We are sorry for any inconvenience.

To prevent multiple charges, please check your email to verify that your first order went through BEFORE placing a second order.

Please disregard any instructions advising you to send in your faulty part, this applies to our rebuild services only.

Volvo TPS Assembly Kit FOR SALE!

This NEW sensor is contact-less and will not become worn over time as there is no contact between parts.  The original sensors have a carbon resistor potentiometer strip that can become worn through as the wiper moves across it.  If your original throttle body has a worn throttle sensor strip then this kit will fix your problem.  Keep in mind that the ETM can have other problems, so there is NO GUARANTEE this will restore your ETM even if you have a good or bad throttle sensor strip.

This kit applies to the following vehicles:

  • 1999 2000 2001 2002 Volvo C70
  • 2001 2002 Volvo S60
  • 1999 2000 Volvo S70
  • 1999 2000 2001 2002  Volvo S80
  • 1999 2000 2001 2002  Volvo V70
  • Other years and models may apply.
  • Please verify that your Throttle Body is the same as the one shown in the photos to the left before purchasing this kit.

This kit also applies to the following Volvo Throttle Body part #’s:

  • 8644344
  • 8644345
  • 8644346
  • 8644347
  • Please verify that your Throttle Body is the same as the one shown in the photos to the left before purchasing this kit.

This kit should correct the following:

  • Rough or surging idle

Please call 888-892-0764 if you have ANY questions about this kit.

When you purchase this *kit you will receive the following:

  • NEW Digital Sensor and matched Magnet
  • NEW Replacement Lid
  • NEW Premium Fel-Pro Gasket
  • NEW Wire Clamp
  • NEW Wire Loom Tube
  • We will email you Installation Instructions upon purchase of this kit

*Soldering tools and skills are necessary

It is VERY important that your ETM truly has a worn sensor to ensure the success of this kit.

There is a somewhat simple test you can do to check, unfortunately it will destroy the old sensor in the process:

  • Remove the old sensor (see photo of throttle body with blue lid)
  • Pull the old carbon strip out and hold it to the light (please see photo provided for an idea of what you’re looking for)
    • If you CAN SEE light through the black part of the strip then this kit SHOULD FIX your problem.
    • If you CANNOT SEE through it then you may have a bad ETM (internal computer fault) and this kit MAY NOT FIX your problem.

If you have any questions, please make sure you ask them before purchasing as there are no refunds for this kit once installed!

Out of stock

Additional information

Weight1.0 lbs
Dimensions8 × 6 × 4 in
Vehicle Year

, , ,

Vehicle Make

Vehicle Model

, , , ,


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.