Polaris Sportsman and Ranger ATV/UTV Power Distribution Module (PDM)
Polaris Sportsman and Ranger ATV/UTV Power Distribution Module (PDM)
Polaris Sportsman and Ranger ATV/UTV Power Distribution Module (PDM)
Power Distribution Module Polaris Sportsman ATV (2006-2007) Ranger UTV (2005-2009) Rebuild
Power Distribution Module Polaris Sportsman ATV (2006-2007) Ranger UTV (2005-2009) Rebuild
Power Distribution Module Polaris Sportsman ATV (2006-2007) Ranger UTV (2005-2009) Rebuild

Power Distribution Module Polaris Sportsman ATV (2006-2007) Ranger UTV (2005-2009) Rebuild

  • Sale
  • $180.00

Attention:

This rebuild service requires that you:

  • Verify that your PDM matches the product photo

    • Also referred to as an ECM - your module MUST match the photo

    • Please see the note on Ranger PDMs and what we cannot fix below.

  • Review our Polaris Troubleshooting Guide to confirm that the problem is in the PDM

  • Remove your PDM

  • Carefully pack and ship it to us - Instructions

  • We rebuild it and ship it back to you

  • Re-install your PDM and get back on the trail

Known issues that we fix:

  • Battery power issues

    • For overcharging issues we recommend replacing the stator

  • No ground to starter

  • Intermittent start or no start

Known issues that we DO NOT fix:

  • If your Ranger PDM is having a Fan Control issue we are no longer able to fix them. Currently we are unable to get replacements for the Power Mosfet found in all Polaris Ranger PDMs. This part controls the fan circuit, and is also used in other functions of the Ranger PDM, but is not the only part we replace in these modules. For other Ranger PDM issues we will still test and repair (if needed).

    What this rebuild includes:

    Year/Make/Model(s) applicable:

    • 2005 Polaris Ranger 2×4 4×4 6×6

      • #R05RB50AA/RD50AA/AB/AC/AD/RF50AA/AB

    • 2005 Polaris Ranger XP

      • #R05RD68AA

    • 2006 Polaris Ranger 500 2×4 4×4

      • #R06RB50AA

    • 2006 Polaris Ranger XP 700 4×4

      • #R06RD68AA

    • 2006 Polaris Ranger 500 4×4 EFI

      • #R06RD50AC

    • 2007 Polaris Ranger 500 2×4 4×4

      • #R07RB50AA/RH50AA

    • 2007 Polaris Ranger 500 2×4 Carb Israel

      • #R07RB50MA

    • 2007 Polaris Ranger 500 EFI 4×4

      • #R07RG50AF/AR/AT

    • 2008 Polaris Ranger 500 2×4

      • #R08RB50AA

    • 2008 Polaris Ranger 2×4 500 Carb Israel

      • #M08RB50AA

    • 2009 Polaris Ranger 2×4 500 Carb

      • #R09RB50AF

    • 2009 Polaris Ranger 2×4 500 Carb Israel

      • #M09RB50MA

    • 2006 Polaris Sportsman 500 EFI

      • #A06MH50AQ

    • 2006 Polaris Sportsman 500 EFI Intl

      • #A06MH50FC

    • 2006 Polaris Sportsman X2

      • #A06MN50AU

    • 2007 Polaris Sportsman X2 500 EFI

      • #A07TH50AL/AQ/AU/AZ/TN50AF/AS/AU

    • 2007 Polaris Sportsman X2 500 EFI Quad

      • #A07TH50EA

    • 2007 Polaris Sportsman 500 EFI

      • #A07MH50AB/AL/AQ/AX/AY/AZ/MN50AF/AN/AT/AY

    • 2007 Polaris Sportsman 500 EFI Intl

      • #A07MH50FC

    Part Number(s) applicable:

    • 4011089

    • 4011090

    • 4011226

    • 4011240

    • 4011375

    • 4011517

    • 4011598

    • 4011657

    Our new website includes a new review platform. If you'd like to see testimonials from our previous website, click here. 

     

    Customer Reviews

    Based on 240 reviews
    100%
    (240)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    S
    Steve Pogue
    Polaris Sportsman ATV PDU rebuild

    Was quick turnaround, done well and it works fine. Thank you.

    P
    Perry Oliver
    Good customer service

    The company has been great to work with. I am in the process of replacing the stator per their advice.

    J
    John Stevens
    I had my worries.

    I was really concerned about the PDM fixing my problem. When I recieved the PDM from you, I went out and installed. It started right away, what a relief! Thank you so much for your expertise troubleshooting and fixing my part. I will definitely refer anyone with similar issues to your company. Thank you!!!

    T
    Troy & Lisa Macy
    Module Repair

    We called and asked questions about the issues we were having with a module on a machine that was brought in. We sent it off to them to be rebuilt. About 2 weeks later we received it back. We had some questions about wiring that wasn't jiving quite the way we thought, so we called, spoke with the person that did the actual rebuild and were successful in getting it back running properly again. We are very happy in all aspects of our dealings with Module Master and highly recommend them. We work on a lot of different machines, and we have to say they are definitely going to be our top go-to for any issues that we run into in the future like this.

    J
    John Palmer
    Great!

    Great service and the price was much better than a buying new replacement. Time frame was as advertised. Would highly recommend this service.

    123
    Back to Popular Rebuilds
    Back to the top